About Sup-R-Wall
The Sup-R-Wall System is a simple, fast and economical pre-engineered and pre-fabricated modular system to form load bearing or non-load bearing walls. It consists of a range of custom manufactured modular wall panels which are assembled on site and is compatible with any design or architectural requirement.
This patented technology can meet every need, from thermally insulated structural walls to lightweight concrete internal partitions and is suitable for multi-storey concrete structures and low rise construction.
It comprises of high impact moulded inserts bonded between two layers of fibre cement boards in the factory and erected on site to produce a straight-to-finish wall.
The structure is created by filling the panels with concrete. For high rise constructions additional load capacity can be obtained by providing extra reinforcing bars and/or increasing the grade of the concrete.
Manufacturing process
The patented Sup-R-Wall system consists of specially designed plastic spacers made from 100% recycled plastic and fibre cement boards, bonded together with adhesive to form a very strong self supporting formwork, capable of being filled on site with concrete.
Fibre cement boards are measured and cut in factory conditions to ensure that the material is bespoke to suit the project design and conditions.
Once cut, Sup-R-Wall boards are marked for placement of specialist designed spacer system to ensure correct positioning and ultimate strength within the wall system.
To further enhance strength within the system, Sup-R-Wall spacers are bonded to the Sup-R-Wall boards and allowed to cure and set.
Once cut, Sup-R-Wall boards are marked for placement of specialist designed spacer system to ensure correct positioning and ultimate strength within the wall system.
To further enhance strength within the system, Sup-R-Wall spacers are bonded to the Sup-R-Wall boards and allowed to cure and set.
Builder and developer benefits
• High quality durable finish
• Fast and clean method of building
• Build times reduced by up to 30%
• Reduced requirement for skilled labour
• Eliminates time consuming site practices
• Wet Trades eliminated
• Minimal wastage
• Straight-to-finish internal and external walls
• No specialized equipment required for erection
• Easy for conventional builders to adapt and use
• Minimal use of scaffolding
• Light, simple and easy to install
• “Push-Pull “ props for plumb/alignment control during pour
• First fix electrical and plumbing completed prior to concrete pour
• Spacers hold re-bars in correct position, no time consuming rebar tie wires
• Complies with Euro, British, Irish, American and Australian Building Codes